Easy Tetris Christmas ornaments

Tetris Christmas ornaments

Okay, this will probably be the last Tetris project for a while! A couple weeks ago, I made Tetris refrigerator magnets using pieces from the Jenga Tetris game. I had some pieces left over, so I thought, why not add to my collection of nerdy Christmas ornaments?

This project was really simple. You’ll need:

  • Tetris pieces
  • An electric drill
  • Screw eyes
  • Ribbon

First, drill pilot holes into the pieces themselves. The Tetris pieces are two plastic halves glued together: all of my holes were on the seam. If you try to force the screw eyes in without pilot holes, you risk splitting the pieces in two.

Second, twist in the screw eyes.

Third, tie ribbon through the screw eyes to hang the ornaments.

And that’s it! This is one of those projects where gathering the materials takes far more time than the execution. It took me five minutes to make five ornaments.

Tetris Christmas ornament

Game on,
~Dennis

Pokeball Christmas Wreath

This year, as I prepared for Christmas, I wanted to come up with a decoration that fit the season but also fit my nerdy, video game interests. I’d seen wreaths before made out of ornament balls, so I decided to make one myself.

Only with Pokéballs!

All you need for this project are Christmas balls, red and green glitter spray paint ($8 a can at Hobby Lobby), a strong wire (like a coat hanger), electrical tape, and ribbon.

First, I gathered the balls, about 70 total.

White and silver Christmas balls

Because the Pokéballs were going to be green and red, I used white and silver balls to fill in the gaps. I eventually added some plain red balls as well.

The larger white balls served as the base for the paint. Putting painters tape around the circumference, I spray painted the tops of half with red glitter paint and half with green.

Spraying green glitter paint on the pokeballs.

I held the balls in my hand and spray painted them, then set them in a box to dry.

I quickly found that the glitter paint was harder to work with than normal spray paint. You can’t really push the button down lightly. If you do, only a clear glue comes out, not the paint. So I held the balls at arms length and tried to apply the paint as lightly as possible. In some cases the paint clumped together as it dried, but other times it stayed on evenly. I’m not sure what caused the difference.

In the future, it’d probably look better to spray the balls with normal green and red paint first, and then put a second, lighter coat of glitter paint on top.

The masking tape didn’t work perfect: sometimes the paint dribbled through.

Red pokeball ornament with paint dribble.

What was most unusual is that sometimes the glue part of the glitter paint pooled at the bottom of the ball, under the masking tape, leaving the sides cleaner than the bottom.

When painting the balls, make sure to leave the “top” hole of the ornament in the center of the ball and toward the back. Once on the wreath, since this messy back-end will be facing the wall, nobody sees too many dribbles.

I followed this woman’s general plan for assembling the wreath. One thing she recommends, which I didn’t realize until all the balls were strung on, is hot glue the metal top of the ball to the ornament itself. Once all the balls are on the wreath, the pressure of so many objects together can cause the balls to pop out of their holders, making it very difficult (and frustrating) to get them back on again.

After all the balls were strung, the wreath was nearly complete. I put about 3-4 small balls between each Pokéball. Because gravity wants to pull all the balls toward the bottom of the wreath, hide any remaining wire at the top with ribbon.

And that’s all there is to it!

Completed pokeball wreath

To make the black line separating the color and white halves, I used electrical tape. I cut strips of tape into four or five smaller stripes, almost like pinstripping, then cut a line circle by hand. The electrical tape sticks well and hides some of the paint dribbles as well.

Overall, I’m pretty satisfied with this project, even if some of the paint on the balls isn’t perfect.

Merry Christmas!

~Dennis

Detail on the Pokeball wreath

Detail on the Pokeball wreath

Update: 1/5/2014

As I packed away my Christmas decorations this season, I couldn’t help but be bothered by all those balls that popped off while I manipulated the wreath. So I took all the balls off the wire, then glued the metal parts in place.

I used super glue, and the process was quite easy, though time consuming. I learned not to pull the metal part off completely: the glue will dry before you bend the little wires to get it back on. So instead I pulled the metal part back just a little bit, put a dab of glue down, then pressed the metal into place.

The only balls I didn’t glue were the Pokéballs. I thought the wreath looked best with all the Pokéballs turned color-side-up, so I left the metal parts unglued so that I could twist them into place once they were back on the wire.

I rethreaded the balls, and only one ball popped off, a green Pokéball at the bottom of the wreath (where all the weight puts pressure on the balls). I’m so glad I took the time to do this. Now I won’t have to wrestle with this wreath next season!

The only task that remains is finding a box that’s wide and flat to store the thing in!